Construction Track Pin Press
120T/160T Industrial Hydraulic Force: Hydraulic Track Pin Press delivers up to 160 tons of thrust at 63Mpa working pressure. This Heavy Duty Track Press and Master Pin Pushers effortlessly remove even the most seized and rusted track pins that sledgehammers cannot budge.
Dual-Voltage 1.5KW Electric Pump: Track Pin Press Machine comes with a 1.5KW electric pump supporting 220V/380V universal power. This Portable Track Pin Press provides stable 1.2L/min flow and works seamlessly in both workshops and remote job sites.
Expandable Multi-Functional System: Hydraulic track link press machine allows easy addition of solenoid valves and remote controls. This versatile Track Link Press and High Pressure Track Press handles pressure testing, lifting, bending and riveting besides track service.
On-Site Direct Repair Solution: Excavator Track Pin Press enables direct repair without full track removal or crane support. This Track Pin Remover cuts equipment downtime from days to hours and eliminates costly workshop transportation fees.
Compact Durable Design: Portable Track Press Machine features a compact 16L sealed oil tank structure. It uses standard 46# hydraulic oil, operates reliably in harsh construction environments and requires minimal routine maintenance.
Product Introduction
Construction Track Pin Press – the tool that fixes the single worst job on any job site. Every crew has that one job nobody will volunteer for: swinging a 16lb sledgehammer at a seized track pin for 5 hours in the mud. This Heavy Duty Track Press ends that garbage forever. It works as a go-anywhere Portable Track Press Machine, industrial-grade Master Pin Pushers, and universal Track Link Press for every crawler you own.
Product Parameters
| Item | Specification |
Motor Power | 1.5KW |
Voltage | 220V or 380V (both in stock) |
Working Pressure | 0-63Mpa |
Working Flow | 1.2L/min |
Oil Tank Capacity | 16L |
Recommended Working Medium | 46# Hydraulic Oil |
Hydraulic Cylinder Thrust Options | 120T / 160T |
Cylinder Stroke | 200mm |
Product Details
120 or 160 tons of pure pushing power: slides through 25-year-old rusted pins in 90 seconds flat. No blowtorches, no broken hammers, no cussing.
Electric pump does all the work. You just flip a lever and watch. No more hand pumping until your arms fall off. One guy does the whole job alone.
16L big tank: knock out 12+ pins on a single fill. Perfect for remote sites with no shops nearby.
Fits in the back of any pickup. Two guys can lift it, one guy can drag it across dirt and gravel.
Fully modular right out of the box. Add solenoid valves, pressure relays, remote switches or hydraulic locks anytime. All work perfectly at full rated pressure.
No fancy electronics. Just steel and hydraulics. If it breaks, any mechanic can fix it with basic tools.
This Hydraulic Track Pin Press works as a tough Excavator Track Pin Press, bulldozer Track Pin Remover, and reliable High Pressure Track Press for loaders, graders and crawler cranes.
Product Usage Scenarios
This Hydraulic track link press machine is way more than just a track tool. Use it to pressure test hydraulic cylinders. Lift heavy engines and transmissions. Bend and straighten steel. Press bearings and bushings. Cut steel plate. Punch holes. Press rebar connections for concrete work. It’s a full shop press that fits in your truck.
Factory Profile
We’ve been building Track Pin Press Machine for 13 years. That’s all we do. We don’t make 50 different products. We only make track repair tools, and we build them to survive the worst job sites on earth. Every unit gets a 2-hour 70Mpa overpressure test before it leaves. If it fails, we cut it up and start over.
Customer Feedback
“I work on oil rigs in Alaska. It’s -30℃ half the year. This Portable Track Pin Press is the only one that starts and works every single time. Saved us $12,000 on a tow bill last month.”
— Heavy Equipment Mechanic, Alaska
“We have 18 excavators working in the Amazon. Everything rusts overnight. This Track Pin Press is the only one that can handle it. We used to fly a mechanic in from the city. Now we fix pins ourselves in an hour.”
— Construction Manager, Brazil
“I’ve owned every brand of Master Pin Pushers out there. This one is built twice as tough. I’ve had it for 3 years, pressed 500+ pins, and it still works like new.”
— Fleet Owner, South Africa
Here’s the simple truth: every hour you spend swinging a sledgehammer is an hour you’re not getting paid to do actual work. This Construction Track Pin Press pays for itself in 2 jobs. Stop wasting time. Stop wasting money. Send us a message today for our latest wholesale price. We reply to every message within 24 hours.
