Hydraulic Excavator Track Press
Universal for All Tracked Machinery: Hydraulic track link press machine works seamlessly with excavators, bulldozers, loaders, pavers and agricultural tractors. It comes with a complete set of adapters to fit pin diameters from 12mm to 60mm, covering 99% of tracked equipment in the market.
ntegrated Structure, No Loose Parts: Track Link Pin Remover features a compact integrated design with all components securely attached. There are no small loose parts that can be lost on construction sites, making it extremely convenient for field transportation and storage.
15-Minute Fast Pin Replacement: Hydraulic Track Master Pin Press can remove and reinstall a single track pin in just 15 minutes. This is 80% faster than traditional manual methods, allowing maintenance teams to service multiple machines in a single day and minimize equipment downtime.
Product Introduction
Our Hydraulic Excavator Track Press is the tool that makes sledgehammers and blowtorches obsolete. Every mechanic has that war story: 8 hours in the mud at 2am, swinging a 12lb hammer, burning through 3 oxy-acetylene tanks, and still stuck with one seized pin. This Hydraulic Track Pin Press does the same job in 90 seconds.
This brute Heavy Duty Track Pin Press works right on the machine. No cranes, no tow trucks, no tearing apart the entire track. It’s not just for excavators either – it’s a perfect Excavator Track Pin Press and universal Track Pin Press for bulldozers, loaders and crawler cran
es.
At only 65kg, this Portable Hydraulic Track Press fits in the back of any service truck. One guy can carry it across rough ground. This no-nonsense Portable Track Press Machine and Hydraulic track link press machine pulls old pins and presses new ones in the exact same setup. No flipping, no extra tools, no headaches.
Product Parameters
| Item | Specification |
|---|---|
| Maximum Hand Force of Pump | 50kg |
| High Operating Pressure Range | 0-63MPa |
| Low Operating Pressure Range | 4MPa |
| High Pressure Flow Rate | 7ml/second |
| Low Pressure Flow Rate | 50ml/second |
| Hydraulic Oil Tank Capacity | 13L |
| Recommended Working Medium | 46# Anti-Wear Hydraulic Oil |
| Matching Motor Power | 1.5kW |
Product Details
Slides right under the track without jacking the machine up even an inch
Dual-flow system: fast advance cuts setup time in half, high pressure crushes even 20-year-old rusted pins
All steel construction, no cheap plastic parts that crack in cold weather
Single lever operation – your new apprentice will use it correctly on their first day
8 precision dies fit 95% of all crawler machines ever built
Fully modular: add solenoid valves, pressure relays, remote switches or hydraulic locks later if you need them
Works for way more than tracks: pressure test cylinders, press bearings, straighten steel, pull bushings
Factory Profile
We’re a small, focused hydraulic tool manufacturer based in Jining, China. We don’t make 100 different products. We only make track pin presses, and we’ve been doing nothing else for 12 years.
Our engineers spend 2 weeks every month on job sites around the world, watching mechanics use our tools and fixing the things that actually break. Every unit we build gets a brutal test: we press 50 rusted scrap pins before it gets packed. If it fails once, it goes back to the bench.
You’re welcome to visit our factory anytime. Bring your own worst stuck track pin and test our machine yourself. If it doesn’t press it out, we’ll buy you lunch.
FAQ
Q: Where can I actually use this Hydraulic Excavator Track Press?
Pretty much anywhere crawler machines work. It’s perfect for emergency track fixes on remote construction sites and logging roads where tow trucks can’t reach. You can use it for scheduled fleet maintenance in mines and quarries, rebuild used equipment in your workshop, repair crawler cranes at ports, and run mobile repair services where you bring the shop to the machine. It also works great for general hydraulic pressing jobs in any repair shop.
Q: How do you package and ship these Heavy Duty Track Pin Press units?
Every unit comes fully assembled and pressure tested in a reinforced plywood crate. We wrap every hydraulic fitting in sealed plastic to prevent leaks during transit. In-stock orders ship the same day payment clears. We ship worldwide via sea, air or DHL express. Every order comes with full cargo insurance that covers any damage or loss, plus a laminated quick-start guide and complete parts list.
Q: Can this machine do more than just track pins?
Absolutely. This Hydraulic Track Pin Press is way more versatile than you think. You can use it to pressure test hydraulic cylinders and pipes, lift heavy parts, bend and straighten steel, press bearings, pull bushings, cut metal, do riveting work, and even press rebar connections for construction jobs. It’s basically a portable hydraulic workshop that fits in the back of your truck.
Q: Do you test every unit before it leaves your factory?
100% we do. We don’t do random spot checks. Every single Portable Track Press Machine we build goes through a 2-hour full-load pressure test at 120% of its rated capacity. We also press 50 rusted scrap track pins with each unit to make sure it can handle real-world conditions. If it fails even once, it goes straight back to the welding bench.
