High Pressure Track Pin Press
Single-person Operation, 60% Labor Cost Cut:Portable Hydraulic Track Press enables one-man full track pin service. Eliminates 2-3 workers needed for traditional hammering methods, slashes on-site labor expenses instantly.
On-machine Repair, Downtime From Days To Hours:Excavator Track Pin Press allows direct repair without full track removal. Replace pins/links right on the machine, cuts downtime from 3-5 days to under 2 hours, avoids costly project delays.
All-weather Heavy Duty, Extreme Site Adaptable:Heavy Duty Track Pin Press features fully sealed hydraulic system and anti-corrosion steel. Works reliably in -20°C to 60°C, adapts to dusty, rainy, muddy harsh construction environments.
Product Introduction
Let’s get straight to the point. Every heavy equipment technician knows the drill: it’s 1:00 AM, you’re 80 miles from the shop, it’s pouring rain, and you’ve been swinging a 14-pound sledgehammer for three hours trying to dislodge a seized track pin. Your arms are numb, your back is screaming, and the machine still isn't fixed. Those days are over. Our hydraulic excavator track pin press turns that three-hour nightmare into a quick, two-minute job.
This rugged hydraulic track pin press operates right where the equipment is parked. There is no need to remove the entire track, use a crane, or haul the machine on a trailer. It is a versatile maintenance tool suitable not just for excavators, but for a wide range of tracked equipment, including bulldozers, loaders, and crawler cranes.
Weighing just 65 kg, this portable hydraulic track pin press fits easily into the bed of any pickup truck. It can be handled by two people and is ready to go whenever and wherever you are. This efficient, portable unit (which also handles track link pressing) allows you to extract old pins and press in new ones without moving the machine or switching tools—saving you time, effort, and hassle.
Product Parameters
| Item | Specification |
|---|---|
| Maximum Hand Force of Pump | 50kg |
| High Operating Pressure Range | 0-63MPa |
| Low Operating Pressure Range | 4MPa |
| High Pressure Flow Rate | 7ml/second |
| Low Pressure Flow Rate | 50ml/second |
| Hydraulic Oil Tank Capacity | 13L |
| Recommended Working Medium | 46# Anti-Wear Hydraulic Oil |
| Matching Motor Power | 1.5kW |
Product Details
Slides directly under the track; no need to jack up the machine.
Two-speed system: Rapid advance speed of 50 ml/sec reaches the pin in just 2 seconds; high-pressure mode at 7 ml/sec tackles even the most heavily rusted or stubbornly seized pins with ease.
All-steel construction. No cheap plastic knobs or handles that could crack or break in temperatures as low as -20°C.
Rubber-coated handle. Ensures a secure, non-slip grip, even with oily or wet hands.
Double-braided hydraulic hose. Highly durable; resists cracking or leaking even after years of heavy daily use.
Single-lever operation. Simple and intuitive—even a novice technician can master it quickly. Comes with 8 standard dies. Compatible with over 95% of track pins manufactured in the last 40 years.
Fully modular design. Components such as solenoid valves, remote switches, pressure relays, or hydraulic locks can be added later without needing to purchase a whole new unit.
Versatile application—it does far more than just handle track pins. Pressing bearings, installing/removing bushings, straightening steel, testing cylinder pressure, lifting heavy components—whatever your needs, we’ve got you covered.
Factory Profile
We are a small factory based in Shandong, China. We build machines that we would want to use ourselves. Whenever a technician reports a fault, we make improvements; whenever someone says, "I wish it had this feature," we incorporate it into the design.
You are welcome to visit us anytime. We’ll give you a tour of the factory so you can witness the manufacturing process from scratch to the finished product. Feel free to bring along your toughest, most rusted-in track pin to test the machine yourself. If it fails to press the pin out, lunch is on us.
Customer Feedback
"I’ve been a mobile repair technician in Texas for 22 years. I’ve used almost every track pin press on the market, but this one is the best by far. No leaks, no breakdowns. I’ve pressed over 300 pins with it, and it still works like new. It paid for itself after just the first two jobs."
— Mobile Repair Technician, USA
"We have 15 bulldozers operating in the Amazon rainforest, where mud and rust are major issues. This portable track pin press is the only piece of equipment that can handle these conditions. We used to have to air-freight parts and wait a week; now, we can complete pin repairs on-site the same day."
— Mine Supervisor, Brazil
FAQ
Q: Can two guys actually carry this thing?
Yep. It’s 65kg. Two average guys can lift it no problem. One guy can even drag it across the ground if he needs to. It fits in the back of any work truck or van.
Q: Will it press really rusted pins?
Absolutely. We test every single machine on 20+ year old rusted scrap pins before it leaves the factory. If it can press those, it can press anything you throw at it.
Q: How long does it take to change a pin?
From the time you pull up to the machine to the time you’re driving away? 15 minutes tops. Most guys do it in 10.
Q: What kind of oil does it use?
Standard 46# anti-wear hydraulic oil. You can buy it at any auto parts store in the world. No fancy special oil needed.
Q: How do you ship these?
Every Hydraulic Excavator Track Press comes fully assembled and tested in a thick plywood crate. We wrap every hydraulic fitting in sealed plastic so it doesn’t leak during shipping. In-stock orders ship the same day you pay. We ship anywhere in the world by sea, air or DHL. Every order has full cargo insurance.
Q: Do you test every machine before it ships?
100% we do. Every single machine gets a 2-hour full load pressure test. Then we press 50 rusted scrap pins with it. If it fails even once, it goes straight back to the welding bench. No junk leaves our factory.
