Bulldozer Track Pin Remover
Expandable Hydraulic Circuit, Customizable Workflows：Portable Track Press Machine allows easy integration of additional hydraulic components. Users can add solenoid valves, pressure relays, remote controls and hydraulic locks to meet specific job requirements within rated pressure limits.
Precision Alignment, No Damage To Track Components：Hydraulic track link press machine ensures perfect alignment during pin pressing and removal. It prevents bending or deformation of track links and pins, extending the service life of undercarriage parts and reducing replacement costs.
Robust Construction, Withstands Harsh Job Sites：Track Link Pin Press is built with high-strength alloy steel and reinforced frame. It operates reliably in extreme conditions including dust, vibration, high temperatures and heavy rain, ensuring consistent performance year-round.
Product Introduction
Our bulldozer track pin remover finally ends the nightmare of removing track pins with sledgehammers and blowtorches. Every experienced mechanic has experienced this agony: wielding a 10-pound sledgehammer, heating track pins until they're red-hot, spending 6 hours, only to end up with sore arms. This hydraulic track pin press can do the same job in just 2 minutes.
This rugged, heavy-duty track pin press can be used directly where the machine is. You don't need to remove any track pads or call a crane. It's ideal not only for excavators but also for all tracked machinery manufactured over the past 40 years.
This portable hydraulic track pin press weighs only 65 kg and easily fits into the side box of any maintenance vehicle. It can be easily moved by one person, even
on rough terrain. This reliable portable track pin press and hydraulic track pad press allows for the removal of old track pins and the pressing in of new ones with the same setup. No flipping, no extra parts, easy and convenient. Product Specifications
Product Parameters
| Item | Specification |
|---|---|
| Maximum Hand Force of Pump | 50kg |
| High Operating Pressure | 0-63MPa |
| Low Operating Pressure | 4MPa |
| High Pressure Flow Rate | 7ml/second |
| Low Pressure Flow Rate | 50ml/second |
| Hydraulic Tank Capacity | 13L |
| Recommended Hydraulic Fluid | 46# Anti-Wear Hydraulic Oil |
| Electric Motor Power | 1.5kW |
Product Details
Slide directly under the track without raising the machine even an inch.
Dual-flow system: 50 ml/s rapid advance halves setup time, 7 ml/s high pressure crushes evenly stuck pins.
All-metal construction, no cheap plastic parts that are prone to damage in cold weather.
Single-lever operation, your new apprentice can use it correctly on day one.
8 precision-machined dies accommodate a wide range of common pin sizes, from 1.5-ton mini excavators to 40-ton bulldozers.
Fully modular: Add solenoids, remote controls, or pressure locks at any time.
Applications extend far beyond tracks: Press bearings, remove bushings, straighten steel, test hydraulic cylinders.
Product Application Scenarios
Emergency track repairs at remote construction sites and family farms
Regular fleet maintenance in mining and quarrying operations
Track crane repairs at ports and docks
Used equipment refurbishment workshops
General hydraulic pressing operations in any repair shop
Packaging and Delivery
Each bulldozer track pin remover is fully assembled and pressure tested, packaged in a reinforced plywood box. We seal each hydraulic joint with plastic to prevent leaks during transport.
Worldwide delivery is available by sea, air, or DHL Express, with full cargo insurance covering any damage or loss. A shrink-wrapped quick start guide and complete parts list are included.
Factory Introduction
We are a small, focused hydraulic tool manufacturer located in Jining, China, and have been dedicated to this field for 12 years.
Our engineers spend two weeks each month at construction sites around the world, observing how machinists use our tools and repairing actual faulty equipment. Every piece of equipment we produce undergoes rigorous testing: before packaging, we press it against 100 rusted, worn track pins. If it fails even once, it must be sent back to the welding workshop for re-welding.
You are welcome to visit our factory anytime. Bring your most difficult track pin to press and test our machine yourself. If the machine can't press it, we'll treat you to lunch.
Customer Feedback
"I work in northern Norway, where the temperature is -18 degrees Celsius all winter. All the track presses I've used before froze. But this hydraulic track pin press starts every time. I've pressed 140 track pins with it and haven't missed a single one."
—Norwegian Heavy Equipment Mechanic
"I run a used equipment yard in Brazil. We refurbish six tracked machines every month. This portable track press has reduced our track refurbishment time from two full days to four hours. It's the best tool we've bought in 10 years."
—Brazilian Equipment Refurbisher
This isn't the cheapest track press on the market. But this machine will still be in your shop ten years from now, performing as well as when it was first purchased. All our customers say it recouped its cost in less than three projects.
