120 ton hydraulic track bushing press
Portable Heavy-duty Performance: Lightweight track pin press (130-200kg) with 70-150 ton pressure, works in remote job sites without workshop setup
Cost-saving Maintenance: Reduces labor cost by 50% & eliminates track component damage, ideal for budget-conscious construction companies in Africa/Asia
Precision Pressure Control: Adjustable hydraulic system with pressure gauge, prevents track bushing deformation during installation
Versatile Application: Track pin press ideal for construction companies, mining operations, agricultural machinery workshops & equipment rental servicesProduct Introduction
Look, if you’re anything like the guys we work with every day, you’ve wasted hours upon hours messing with track pins and bushings by hand—hammering till your arm’s sore, prying with crowbars like it’s 1950, and praying you don’t scratch up your track links or bust something expensive. It’s slow as molasses, it’s dangerous, and every minute your machine’s down is money out of your pocket. That’s why we built this 120 Ton Hydraulic Track Bushing Press—no fancy nonsense, no guesswork, just a tool that gets the job done fast, right, and without breaking your equipment.
Product Parameters
Parameter Name | Specification |
Model | 120 Ton Hydraulic Track Bushing Press |
Maximum Press Force | 120 Ton (1200 kN) – trust me, it’ll pop even the most seized, rusted pins you’ve got |
Working Pressure | 1-63 MPa (9000 PSI) – you can tweak it to whatever the job needs |
Hydraulic Cylinder Stroke | 100 mm (3.94 inches) – more than enough travel for most track pins out there |
Cylinder Diameter | 50 mm – thick enough that it won’t bend when you’re pushing hard |
Track Pin Diameter Range | ≤ 60 mm (2.36 inches) – fits most excavators and bulldozers you’ll run into |
Hydraulic Pump Type | Dual Option: Hand Hydraulic Pump / Electric Hydraulic Pump – pick whichever works for where you’re working |
Pump Flow Rate | Hand Pump: 7 ml/time (high-pressure), 50 ml/time (low-pressure); Electric Pump: 1.2 L/min – fast enough to keep up with your crew |
Oil Tank Capacity | Hand Pump: 5 L; Electric Pump: 16 L – no constant refilling, which is a huge time-saver |
Recommended Hydraulic Oil | 46# Hydraulic Oil – you can find this stuff anywhere, no need to order special |
Material | High-Strength Alloy Steel (Frame), 40Cr (Tooling) – built to last, not just look pretty on a shelf |
Weight | 280 kg (617 lbs) (Hand Pump Model); 320 kg (705 lbs) (Electric Pump Model) – heavy enough to stay stable, light enough to move around |
Dimensions (L×W×H) | 850×600×1200 mm (33.5×23.6×47.2 inches) – fits in most shops, and easy to load onto a truck |
Voltage (Electric Pump) | 220V/380V, 50Hz (Customizable for 110V/60Hz) – works no matter where you’re located |
Product Details
1. Reinforced Alloy Steel Frame
We didn’t just slap any steel together here—this cylinder liner press tool frame’s high-strength alloy, so it can take 120 tons of force and not bend a bit. We’ve seen cheap presses break right at the stress points, so we added extra reinforcement there—exactly where you need it when you’re dealing with a pin that’s seized tight. The surface is precision-machined too—no rough edges to scratch up your track links. We know your equipment’s expensive; this press protects it, not messes it up.
2. High-Efficiency Hydraulic System
The hydraulic cylinder’s the heart of this thing, and we made sure it’s rock-solid—no leaks, no weak spots. It turns hydraulic pressure into smooth, controlled force, so you can take out or put in pins and bushings without jarring them or breaking parts. That dual pump option? Total game-changer. Use the hand pump when you’re out in the field with no power (we’ve all been stuck there), and the electric pump in the shop to save your arms from cranking all day. We added a pressure relief valve too—no overloading, no risking the machine or your guys.
Product Usage Scenarios
We built this bushing press machine for the real world—where your equipment’s working its tail off, and downtime’s not an option. Here’s where our customers actually use it, day in and day out:
1. Construction Sites
If you run a construction crew, you know excavators and bulldozers take a beating. Track pins wear out fast from rough ground and heavy loads, and waiting to tow a machine to the shop costs you thousands. This press lets you fix it on-site—grab the hand pump, set it up, and have the pin replaced in 30 minutes. No more waiting, no more lost work days. We’ve had guys tell us it’s cut their on-site repair time by 70%—that’s real money saved.
2. Mining Facilities
Mining’s tough—dust, dirt, extreme heat and cold, and equipment that runs 24/7. Track components seize up fast, and manual tools just can’t handle it. This press is built for that environment: the frame keeps out dust and debris, the hydraulic system works in any weather, and it has the force to pop even the most seized pins.
Packaging and Delivery
We’ve been shipping these presses all over the world for years—we We wrap the whole portable bushing press machine in waterproof plastic to keep out rust and dust, and all the tooling, hoses, and extras go in a separate labeled box inside the pallet. No lost parts, no damaged pieces. If you’re ordering 5 or more, we use reinforced wooden crates—extra protection for bulk orders. We check every package before it leaves our factory, so you know it’s ready to go when it ships.
Delivery Options
•Express Shipping (DHL/FedEx/UPS): 3-7 business days. Perfect if you need it fast—we’ve had customers get theirs in 3 days to the US, 4 to Europe. Great for small orders or urgent repairs.
•Sea Freight: 20-45 business days. The cheapest way for bulk orders. We work with trusted carriers, so you know your order will get to your nearest port on time. We handle all the paperwork too—no hassle for you.
•Air Freight: 5-10 business days. Middle ground—faster than sea, cheaper than express. Perfect for medium-sized orders.
We send you a full tracking number as soon as your order ships—you can check where it is every step of the way, right from your phone or computer. Our team double-checks every package to make sure all parts are there, and the press is in perfect working order. No surprises, no missing pieces.
Customer Visits
We love having customers visit our factory—come see how we build your press. Our team will give you a full tour, show you our CNC machines, our quality control process, and let you test the 120 Ton press yourself. We’ve had customers from the US, Australia, Brazil, and Canada visit—they all say it’s reassuring to see how much care we put into each machine.
