Crawler excavator sleeve press
High-Tonnage Heavy Hydraulic Power: Strong pressure for rusted stuck sleeves track pin press, easy disassembly for mine heavy-duty excavator tracks
Dual-Power Flexible Drive: Electric & manual hydraulic track repair press, stable use in remote sites without constant power supply
High Efficiency Labor-Saving Operation: No brute hammering for excavator track bushing press, boost maintenance speed by 80% and reduce labor loss
Wide Universal Model Compatibility: Fits 1-20 ton excavator & dozer track press machine, multi-brand equipment no customized modification
Product Introduction
This crawler excavator sleeve press is a heavy-duty hydraulic tool built for real job site use — made to pull, press, and replace track bushings, pins and sleeves fast, without tearing down your whole excavator or hauling it to a shop. We design hydraulic track link press machine for durability, simple operation, and reliable thrust that holds up day in and day out, so you cut downtime, save on labor, and get precise, damage-free installs every time.this machine runs on high-pressure hydraulic power to deliver steady, controlled pushing force for track maintenance on crawler excavators, loaders and bulldozers. It works equally well in a repair shop or out on a remote job site, with a solid steel frame and adjustable parts that fit most common excavator sizes and sleeve diameters.
Product Parameters
Model | 70T / 100T (custom thrust available upon request) |
Working Thrust | 70 Tons / 100 Tons |
Cylinder Stroke | 100mm – 150mm (adjustable) |
Sleeve Diameter Range | 60mm – 120mm (fits most standard excavators) |
Power Type | 220V single-phase / 380V three-phase / manual hydraulic pump |
Operating Pressure | 63MPa (stable high-pressure output) |
Machine Size | 1100*360*410mm (compact for transport) |
Net Weight | 145kg – 160kg (solid but easy to move with a forklift) |
Motor Power | 1.5KW (efficient, low energy use) |
Product Details
Solid Steel Frame Construction：The hydraulic track press main body is fully welded from thick solid carbon steel plates. Our workshop uses professional deep welds all around, then applies thick anti-rust primer plus outdoor top coat. No bending, no rust even working in muddy, dusty open yards all year long.
Adjustable, Interchangeable Tooling：All key working parts are easy to change on site. We supply different pressing dies, rotating lock plates and stretch rods to fit most common sleeve sizes and excavator track widths. Your workers can replace tools in minutes only; no complex calibration, fast switch between different repair jobs directly.
Dual Power Flexibility：You get two power choices to match real working spots. Plug in electric motor when you work long hours inside repair shops for stable steady pressure. When you go remote field sites without power supply, simply use manual hand pump instead. The control valve reacts smooth and quick, you can adjust pressure fine to protect bushings from damage.
Safety & User-Friendly Touches：Safety details are all practical for daily operation. Inside pressure relief valve stops overload automatically during pressing work. Non-slip handle grip and wide heavy base keep the machine stable, never slide or move when your operator applies strong force.
Packaging and Delivery
Packaging
Each sleeve press ships in a sturdy export-grade plywood crate, lined with thick foam padding to absorb shocks and prevent scratches during long transit. All accessories — extra dies, wrenches, manual and warranty card — go in sealed plastic bags and are secured inside the crate to avoid shifting.
Shipping & Delivery
Packaging meets all international export standards, safe for sea, land and air shipping.
Clear labels with model number, handling warnings and shipping marks are printed on every crate.
Small orders: LCL sea freight or air express for fast delivery; bulk orders: full container load with fixed lead times.
Custom packaging options: logo printing, extra protective wrapping, and custom crate sizing available per customer request.
FAQ
Q: Will this press fit my excavator?
A: It works with most 6-30 ton crawler excavators, covering 60-120mm sleeves. We can make custom dies for unusual sizes — just send us your specs.
Q: Can I use this portable hydraulic track press for bulldozers or loaders too?
A: Yes — it’s designed for any crawler-type equipment with track bushings and pins, including bulldozers and track loaders.
Q: Do I need special training to run it?
A: Nope. The manual and video walk you through everything, and most crews pick it up in 10-15 minutes. Simple controls, no complicated setup.
Q: How long is the lead time for bulk orders?
A: Standard models ship in 7-15 days; custom orders take 15-25 days, depending on the changes you need.
Q: Do you offer OEM branding?
A: Yes — we can add your logo, custom paint color and labeling to match your brand.
Q: What’s the basic maintenance routine?
A: Wipe down dies regularly, check hydraulic oil levels, replace worn seals when needed, and store it in a dry spot. Full maintenance steps are in the user manual.
