Diesel engine mini excavator

Product Introduction

We don’t make fancy, overpriced diggers with gimmicks you’ll never use. We make tough, no-nonsense diesel engine mini excavator for real people: contractors, farmers, landscapers, rental yard owners, folks who make their living with their equipment.We don’t outsource a single part of the build. Every weld, every assembly, every test is done in-house. Before any machine leaves our floor, it runs non-stop for 48 hours under full load. We check every bolt, every seal, every hydraulic line. If it doesn’t pass, it doesn’t ship.We’ve sent these diggers to over 80 countries: the US, Canada, all over Europe, Australia, Southeast Asia, Africa, South America.This isn’t a disposable machine. It’s a tool you’ll use for years, that’ll make you money, that won’t let you down. That’s what we build.

Product Parameters

Note: Every single spec on this table can be adjusted. Need a longer arm for more dig depth? Different engine brand? Wider/narrower body? Just tell us what you need, our engineers will draw it up and send you a quote. No crazy minimums for custom work.

Product Details

First up: The Engine (The #1 thing you care about, we know)

We don’t cut corners here.  No off-brand junk that’ll die in a year. No engines that’ll get your machine seized at customs.

We’ve tested these engines in every extreme you can think of: -20℃ winters in Canada, 45℃ summers in the Middle East, dusty farms in Australia, muddy plantations in Southeast Asia. They fire up first time, every time. They run quiet, so you can work in residential neighborhoods without getting noise complaints.

Hydraulic Lines: No perceptible lag during full-load lifting.

We reinforced every oil line, sealed every connection, and optimized the whole circuit to cut down on pressure loss and leaks. Our customers tell us our hydraulic systems last 30% longer than the cheap diggers you see floating around online. Less leaks, less downtime, more work done. That’s the whole point.

Boom & Arm: We build this to take a beating

This is where 90% of cheap diggers fail. They use thin steel, shoddy welds, no reinforcement, and 6 months in, the boom cracks. We don’t do that.Our boom and arm are cut from high-strength manganese steel. Welded by robots for consistent, perfect welds (no human error here), then heat-treated as a single piece to make it even stronger. We add extra steel plating at every high-stress point – the places that take the brunt of digging, breaking, and lifting.

Product Usage Scenarios

We don’t make this machine for one job. We make it for every job you’ve got. Here’s what our customers are using it for, right now:

Demolition & concrete breaking: Pair it with a hydraulic breaker, and it’s perfect for indoor demolition, breaking up pavement, crushing rock, small foundation work. It fits inside basements and buildings where big demolition equipment can’t go, and it’s way cheaper than hiring a big machine for small jobs.

Rental yards: This is our #1 selling model for rental companies. It’s tough, it barely breaks down, it’s easy for first-time users to learn, and it’s simple to maintain. Our rental customers tell us these machines are out 90% of the time, and pay for themselves in months, not years.

Packaging and Delivery

We’ve shipped 10,000+ of these, we know how to get it to you in one pieceWe’ve been doing this for 12 years. We’ve seen every mistake you can make when shipping heavy machinery overseas. We’ve fixed all of them. Here’s how we get your machine to you, perfect condition, no surprises:

How we pack your machine

Every machine gets a full anti-rust, anti-corrosion coating before we touch it. We’re shipping it across the ocean, it’s going to get wet. We don’t cut corners here.

All the sensitive parts – engine, hydraulic valves, cabin controls, joysticks – get wrapped in waterproof film, then thick bubble wrap, then a protective plastic cover. No bumps, no scrapes, no water damage.

The whole machine is bolted down tight to a heavy-duty steel pallet, with anti-slip mats under it. We add extra wooden bracing around every high-risk part, so it doesn’t shift during transit. No matter how rough the ship gets, it’s not moving.

If you’re ordering LCL (less than a full container), we put the whole thing in a fully closed wooden crate, for extra protection.

All attachments are wrapped individually, packed in labeled wooden cases, so you can count everything easily when it arrives. No missing parts.

Shipping & lead times

In-stock standard models: We can load it and ship it within 3-7 working days after we get your deposit. No waiting around.

Custom models: 15-25 working days, depending on what you need changed. We’ll give you an exact date before you order, and we’ll hit it. No delays, no excuses.

We do every shipping term you need: EXW, FOB, CIF, CFR, DDP door-to-door. If you want to handle shipping yourself, great. If you want us to take care of everything, from our factory door to yours, we can do that too.

We’ll send you photos every step of the way: before packaging, after packaging, when it’s loaded into the container, the tracking number, everything. You’ll always know where your machine is.

Service Commitment

Our Promise To You: No fine print, no runaroundWe don’t hide behind legal jargon. Here’s exactly what you get when you buy a digger from us:

Before you buy

You’ll talk to one of our sales reps, all of whom have 10+ years of experience in this industry, and know these machines inside and out. They’ll send you a full catalog, a detailed quote, and recommend the right model and attachments for your work. No pushy sales tactics, no upselling you stuff you don’t need. Just honest advice.

Free live video tour of our factory, and live test drive of the machine you’re interested in. You can watch us run it, test the controls, ask any questions you want, all from your home or office.

On-time delivery guarantee

We stick to the delivery date we agree on before you order. 98% of our orders ship on time. We’ll send you updates every step of the way: production progress, packaging photos, loading photos, tracking number. No radio silence, no hidden delays.

Warranty

1 year full machine warranty (whichever comes first) for any manufacturing defects. If it’s our fault, we fix it. No hoops to jump through.

2 year warranty on the core components: engine, hydraulic pump, main control valve.

Wear parts (bucket teeth, track pads, filters, seals) aren’t covered under warranty, but we sell all original spare parts at cost price, for as long as you own the machine. No markup, no price gouging.

After-sales support

We have a dedicated after-sales team that works around the clock, to cover every time zone. If you send us a message, we’ll get back to you within 2 hours, guaranteed. Even if it’s 2am our time.